Compiling Huawei E355 driver - Raspberry Pi Forums

hello,

need compile driver huawei e355 3g dongle. can act ethernet router on usb. mass storage capability recognized. not recognized usb modem either (no /dev/ttyusb0 created)

code: select all

t:  bus=01 lev=03 prnt=05 port=00 cnt=01 dev#=  7 spd=480 mxch= 0 d:  ver= 2.00 cls=00(>ifc ) sub=00 prot=00 mxps=64 #cfgs=  1 p:  vendor=12d1 prodid=14fe rev=01.02 s:  manufacturer=huawei s:  product=huawei mobile c:  #ifs= 1 cfg#= 1 atr=80 mxpwr=500ma i:  if#= 0 alt= 0 #eps= 2 cls=08(stor.) sub=06 prot=50 driver=(none)

driver available from here

downloaded kernel source, downloaded module.symvers, did "make modules_prepare". kernel source ready compile additional modules.

when try compile huawei driver error:

code: select all

make[2]: leaving directory `/usr/src/linux-rpi-3.6.y' make[1]: *** [modules] error 2 make[1]: leaving directory `/usr/local/mobile_partner/driver/ndis_driver/ndis_src/src' make: *** [modules] error 2 make -c src/ install make[1]: entering directory `/usr/local/mobile_partner/driver/ndis_driver/ndis_src/src' #install -m 744 -c hw_cdc_driver.o /lib/modules/3.6.11+/kernel/drivers/usb/net #depmod -a #modprobe hw_cdc_driver /usr/local/mobile_partner/driver/ndis_driver/ndis_src/src/add_header.sh  "install" modprobe hw_cdc_driver fatal: module hw_cdc_driver not found.

(the full output available here)

can me fix this, please ?

regards.

hello,

did manage working?
i'm considering huawei e355 rpi.

cheers

raspberrypi